ISO 1C Storage Container

ISO 1C Storage Container

ISO 1C Storage Container is fully suitable for logistic needs. Container is designed for storage, transportation, manipulation and stacking of storaged material. Container is fitted with binding means (fastening straps and multipurpose strips). Container is manufactured in three versions that differ in specific interior layout.

STORAGE ISO 1C CONTAINER (hereinafter referred to as 'the container') thanks to its constructional and equipment is fully suitable for logistic needs. Container is designed for storage, transportation, manipulation and stacking of standard NATO palettes with palettes of following dimensions: 1 200 x 800 mm, 1 200 x 1 000 mm in two layers, 1 200 x 800 x 1 000 mm, 1 200 x 800 x 500 mm and Fuel and Lubricants POLpalettes with dimensions of 1 325 mm x 1 110 mm x 754 mm.

STORAGE ISO 1C CONTAINER is manufactured according to technical specification KAR-BOX 040-01. Container is introduced into Czech Army operation. Catalogue property No.: 011080870007.

Container is fitted with binding means (fastening straps and mulitpurpose strips) and/or rack system that are intended for fastening of transported material or goods.

Container is manufactured in three versions that differ in specific interior layout.

Version "A"

Catalogue property No.: 0110808070007
Container is equipped with:

  • multipurpose side strips ANCRA
  • fastening straps ANCRA

Multipurpose side strips ANCRA are mounted on side and front walls of container. Side strips are used for fastening of fastening straps. Fastening straps are stored in holder that is mounted for this purpose in container.

Version "B"

Catalogue property No. 0110808070006
Container is equipped with:

  • multipurpose side strips ANCRA
  • fastening straps ANCRA
  • ANCRA story system

Multipurpose side strips ANCRA are mounted on side and front walls of container. Side strips are used for fastening of fastening straps. Fastening straps are stored in holder that is mounted for this purpose on the container door.

Version "C"

Catalogue property No. 0110808070005
Container is equipped with:

  • multipurpose side strips ANCRA
  • fastening straps ANCRA
  • ANCRA story system
  • anchoring loops ifn the floor
  • ANCRA rack system

Multipurpose side strips ANCRA are mounted on side and front walls of container. Side strips are used for fastening of fastening straps. Fastening straps are stored in holder that is mounted for this purpose on the container door. Anchoring loops are also mounted in the floor and are intended for fastening of fastening straps.

Transportation of container

Czech Ministry of Transportationissued a Technical suitability certificate for this exchangeable superstructure No. N-1285.

On railway, container is transported as "CONTAINER". During waterway transportation it is
transported as "CONTAINER".

Stacking of Container

The producer allows to stock up to 9 (8+1) fully loaded containers on each other. The containers must be safely secured under ČSN ISO 3874.

Container handling

Container is handled in compliance with regulation ČSN ISO 3874. Container can be handled in the following ways:

  • on container side mover on TATRA T-815 26 OR 81
  • 36 255 - 8x8.2 as well as the on VOLVO Fl 12-8 x 4 with handling system KLAUS
  • on container carrier TATRA T-815 26 OR 81 36 255 - 8x8.2 equipped with MULTILIFT MK-IV hook lift with an adapter
  • on container carrier TATRA T-815 26 OR 81 36 255 - 8x8.2 equipped with transport platform FLATRACK 20 "M"
  • on side forklifts

CSC label

Container is labelled with CSC label according to regulation ČSN ISO 6346 based on authorization TZ-0603/04 issued by Czech Industrial and Naval Register in Prague.

This container is manufactured in compliance with technical regulations regarding the production of ISO 1C containers according to ČSN ISO 668, ČSN ISO 1161 and based on container production certificate issued by ČLPR Prague. Containers can withstand forces generated during road, railroad, waterway transport according to ČSN ISO 1496-1.

The container's floor is made of anti-slippery plywood that is screwed on and glued to the container's basic frame. The storage area is entered through a rear, double-wing door with rod closures and with TIR adjustment.

Container dimensions - Outside
Length 6 058 mm
Width 2 438 mm
Height 2 438 mm
Container dimensions - Inside
Length min. 5 870 mm
Width min. 2 330 mm
Height min. 2 200 mm
Tare 2 500 ± 5% kg
Maximal payload 21 500 kg
Maximum gross mass 24 000 kg

Maintanance service and repairs of containers

Manufacturer ensures all repairs under guarantee, repairs, container inspections and container´s electrical installation inspections.

Downloads

Are you interested ISO 1C Storage Container? Write to us!

Items marked with an asterisk (*) are compulsory.



News by e-mail

If you wish to receive newsletter please sign in.

News by e-mail

© 2017 KARBOX s r.o.

Private policy | Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing

Karbox

 

to top ↑